New Holland D180 Service Manual

D180 – New Holland

New Holland D180 Service Manual

MODELS COVERED:

All Models/Engines/Trim/Transmissions Types Are Covered.

Substance:

This great Service Repair Workshop Manual covers all fix techniques A-Z.

Each fix and administration technique is secured.

This d180 repair manual contains top-notch pictures, circuit graphs, guidelines to assist you with working, support, analyzing, and fix your truck. This archive is printable, without limitations, contains accessible content, bookmarks, crosslinks for simple route.

ELECTRICAL SYSTEM: New holland d180

• Disconnect batteries prior to any intervention on machine or electrical system (cleaning, repair, maintenance).
• Should booster batteries be used, remember to connect both ends of the booster cables in the proper manner (+)

with (+) and (-) with (-). Avoid short-circuits of the terminals. Follow thoroughly the instructions of this Manual.

• Before any intervention, make sure that the main switch is OFF.
• BATTERY GAS IS HIGHLY FLAMMABLE. Leave battery box open to improve ventilation when recharging batteries. Never check charge by placing metal objects across the posts. Keep sparks or open flames away from batteries. Do not smoke near battery to guard against the possibility of causing an explosion.

• Before any intervention, make sure that there are no fuel or electrolyte leakages; eliminate them before proceeding with further work. When recharging batteries in closed ambients, make sure that there is appropriate ventilation to prevent possible accidental explosions due to the accumulation of gases generated during the recharge.

New Holland D180 Service Manual

SUMMARY
GENERALITIES
ENGINE
TRANSMISSION
FINAL DRIVES
BRAKES AND STEERING DIFFERENTIAL –
D180 POWER STEERING
BRAKES AND STEERING CLUTCHES –
D180 STEERING CLUTCHES
UNDERCARRIAGE
DOZING EQUIPMENT – HYDRAULIC SYSTEM D180 PS
DOZING EQUIPMENT – HYDRAULIC SYSTEM D180 SC
ELECTRICAL SYSTEM
AIR CONDITIONING UNIT

SUBJECT PAGE
SAFETY RULES…. I-VIII
TECHNICAL DATA TABLES
Identification data . 0-3
Table of fluid capacities…. 0-4
Main dimensions .. 0-5
Technical data D180 PS – D180 SC …… 0-6
CONTROL DATA ON THE MACHINE … 0-21
TABLE OF WEIGHTS ……………… 0-23
LIST OF WEIGHTS FOR MAIN SERVICE COMPONENTS…… 0-25
CENTRE OF GRAVITY TABLE …. 0-27
GENERAL INSTRUCTIONS……… 0-28
TROUBLESHOOTING…. 0-33
UNITS OF MEASURE…. 0-34
TABLE OF TIGHTENING TORQUES …. 0-36

HYDRAULIC SYSTEM

• Fluid escaping under pressure from a very small hole can be almost invisible and can have sufficient force to
  penetrate the skin. Use a piece of cardboard or wood to search for suspected pressure leaks. DO NOT USE HANDS. If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.
• Stop the engine and release all pressures in the system before removing panels, housings, plugs or covers.
• In case pressures must be measured, use instruments of adequate capacity. Always follow the recommended procedures.

New Holland D180 Service Manual